Drizzle430

Hey guys my names Andre and im new to the forum. I just bought a 1987 rx7 swapped the engine with another NA because of a few problems the original engine had. Even after the swap im still have a some problems but nothing to big, the only really big thing is one of the secondary injectors. It leaks, its the one closest to the firewall. The gas just pours out from the injector bore. At first i thought there was somthing in there clogging it, but there seems to be nothing there. The injector is tight and dosnt move when it in place but fuel still leaks. I'm not sure if its just the injector or if there are other problems. Any advice or ideas would really help out alot this is my first rotary so im still a nub haha. Really appreciate the help

-Dre

melicha8

iTrader: (1)

You need to pull your upper intake manifold(UIM) and get them sent in to be cleaned ~20$ per injector. While you're at it go and buy a new pulsation damper(PD) and intake mani gaskets. Search on all these things and you'll see why and how.