Injector power limits
#1
L.P.C
Thread Starter
Join Date: Feb 2009
Location: Palmerston North, New Zealand
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Injector power limits
What is the limit of power on factory injectors with factory S5 turbo......
Also just wondering if anyone could give me a rough idea of power with my setup.
13b extended port
550cc primary and secondary
Factory rail and FPR
Bosch 023 fuel pump
3 1/2 full exhaust
factory s5 turbo
HKS FMIC
Bosch coils and msd leads
Just having microtech ecu installed atm and having tune, but just wondering what i can be in for...
Also just wondering if anyone could give me a rough idea of power with my setup.
13b extended port
550cc primary and secondary
Factory rail and FPR
Bosch 023 fuel pump
3 1/2 full exhaust
factory s5 turbo
HKS FMIC
Bosch coils and msd leads
Just having microtech ecu installed atm and having tune, but just wondering what i can be in for...
#2
Rotary Enthusiast
iTrader: (2)
Join Date: May 2005
Location: E-L Netherlands
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
with that setup... get bigger injectors.
otherwise its a waste of money for the porting imo
now you may be stuck at around 250-260hp with a ported motor?
put in some 720cc sec injectors and you will pass 300
i had 310hp with stock ports/stock turbo with 550/720 injectors @ 14psi
injectors are not that expensive, but now you need it to be tuned twice
otherwise its a waste of money for the porting imo
now you may be stuck at around 250-260hp with a ported motor?
put in some 720cc sec injectors and you will pass 300
i had 310hp with stock ports/stock turbo with 550/720 injectors @ 14psi
injectors are not that expensive, but now you need it to be tuned twice
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM