OK i have 89 TII
got some 4x850cc injectors from RC Engineering.

I know that i have to install the resistors @ the ECU.

I do not want to slice up on new engine harness that i got installed 3 years ago.

I saw this from another thread and want to confirm that the S5 has an EV6 and to use the squre center notch EV1 i can use the connectors here.

http://www.fiveomotorsport.com/Injector_CONNECT.asp

Thanks

 

Well, if the 850's are center notched square then yes, you have to use the ev1 rectangular style connectors. ~rich

you welcome for the link

 

i know the 850xx have the rectangle/square connector with center notch which is an EV1 connector.

IS the stock connector an EV6?

 

This one fits the stock injector plug:

http://www.fiveomotorsport.com/Parts...ectEV1Male.jpg

Then you would need an EV1 female to connect to the injector.

 

BUMP

Mr Vaughn : Did this ever work out? I am also trying to find some adapters from oval to round.