injector connector plugs
01-03-06, 05:17 PM
#1
Full Member
Thread Starter
Join Date: Sep 2005
Location: fort myers florida
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
injector connector plugs
where can i find the injector plugs for the secondary injectors. the ones i have in my 90 GTU were different in the secondary because the pulgs were different now i am going to 550's and need the orignal injector plugs. if you have a set let my know. my N/A turbo project is near completion this is my last set back until everyting is complete
01-03-06, 11:15 PM
#4
southern style
Join Date: Dec 2005
Location: warner robins, georgia
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
dude i hope your not trying to mix high impedence plugs with low impedence... if your plugs are different then you have to get the matching injectors or they wont work. you cant interchange them withought a resistor.
01-04-06, 12:53 AM
#5
Law Breaker
Join Date: Oct 2005
Location: S.F. Bay Area, California 510
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by matts86fc3s
dude i hope your not trying to mix high impedence plugs with low impedence... if your plugs are different then you have to get the matching injectors or they wont work. you cant interchange them withought a resistor.
01-04-06, 02:56 PM
#6
measure resistance before you put injectors in
I put s5 550cc secondaries in my 88 GTU (because the 88's have the same impedence as an s5) and all I did was splice in the roundish purple connector.
oh and read the FAQ, it mentions all the stuff about injector plugs etc
I put s5 550cc secondaries in my 88 GTU (because the 88's have the same impedence as an s5) and all I did was splice in the roundish purple connector.
oh and read the FAQ, it mentions all the stuff about injector plugs etc
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
86rxNa
2nd Generation Specific (1986-1992)
2
08-11-15 11:51 AM