chris_stampe

I finally got my new TII up and running well and I go to change the coolant and it is well mixed with oil to a watery oil mix. doesnt seem to have any water in the oil though. Could this be a line I misconnected? Not the oil cooler lines, what could it be??

Thanks,
Chris

rxseven

Is it just a residue stuck on the plastic tube or actual oil droplets in the coolant?

Project84

Hey chris, I checked around a bit and this is what you should do. Check you compression, pressure check the coolant system, and double check all your coolant and oil lines. You have the oil injectors in the lower manifold hooked up right? Does smoke come out the exhaust? If so, what color? Knowing that will help a lot. Also, I don't know if coolant lines run to the turbo (All my RX7s have been N/As), or if its just oil lines, but check them too. I posted a pic from the FSM of the oil path in the turbo II. I can't remember if you told me whether or not you have a FSM. If not let me know and I can tell you where you can download one from for free.

HAILERS

If your not losing cooolant, ease up on the worry. Prob residue of sorts as stated above.

chris_stampe

Im very retarted, just residue and i had a little oil in the pan i was draining into. Sorry for the stupid post. Ill go drive my new TII now....

CrackHeadMel

iTrader: (2)

LOL, hey, it didnt hurt anyone asking, always ask

Roy James

sho' nuff, better safe than sorry

Rxmfn7

iTrader: (4)

Roy James : PLEASE check you PM and get back to me...