Idle Problem
#1
Full Member
Thread Starter
Join Date: Jun 2002
Location: Alberta, Canada
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Idle Problem
My engine is streetported and the intake is also ported. When its fully warmed up 3/4 of the time it idles roughly around 700rmps, the other 1/4 of the time it idles properly around 1000-1100rmps. Another thing is that in colder weather it almost always idles perfect (-0C). Any suggestions what this could be?
P.S- I cleaned the BAC valve and the motor only has 14000kms on it.
P.S- I cleaned the BAC valve and the motor only has 14000kms on it.
#2
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
what type of idle control are u using?
i have a street port and not bac.
i use the butterflies and the idle mixture screw.
mine will very rarely stay at 1k and that is a tps thing. If i press the gas lightly it goes back down to 750rpm.
check and re-check your tps. Sounds like it might be a bit rich.
Try mixing the ratios. It takes a long time to get.
Mine idles about 50 rpm lower when cold and it will idle roughly with a streetport.....
i have a street port and not bac.
i use the butterflies and the idle mixture screw.
mine will very rarely stay at 1k and that is a tps thing. If i press the gas lightly it goes back down to 750rpm.
check and re-check your tps. Sounds like it might be a bit rich.
Try mixing the ratios. It takes a long time to get.
Mine idles about 50 rpm lower when cold and it will idle roughly with a streetport.....
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM