Identifying And Rebuilding a Turbo.
#1
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Identifying And Rebuilding a Turbo.
Hows it going folks...
Just got a Blown s5 Turbonetics Hybrid... 60-1 Compressor wheel, Ported wastegate, to4 housing and stock hotside Fins for both hot and cold are in good shape... I was doing some searching earlier... and i came to my own conclusion that the rebuild kit for a s5 stock hitatchi turbo would suffice for rebuilding this upgraded Turbo? Or are some of the seals different?
if anyone has any experience with this please let me know!
Any input will be appreciated,
Evan
Just got a Blown s5 Turbonetics Hybrid... 60-1 Compressor wheel, Ported wastegate, to4 housing and stock hotside Fins for both hot and cold are in good shape... I was doing some searching earlier... and i came to my own conclusion that the rebuild kit for a s5 stock hitatchi turbo would suffice for rebuilding this upgraded Turbo? Or are some of the seals different?
if anyone has any experience with this please let me know!
Any input will be appreciated,
Evan
#2
tom port.. AKA streetport
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
i THINK the center sections are the same (S4 & S5) but THIS is the rebuild kit posted ini the thread to rebuild my S4 Aireasearch stage 2 TO4B....
have you found a rebuild kit for your yet? im always interested in finding products for the 7 and saving them on the PC just in case!
have you found a rebuild kit for your yet? im always interested in finding products for the 7 and saving them on the PC just in case!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM