iceblue

Before you shake your head at me let me explain.

I am asking if someone can give me an identification list of the relays when not in the car. I attached a pic of the relays I want to know about. This is on a JDM turbo harness. The issue I have is in the FSM the colors are not matching my wires and the empty spots the FSM shows are not there on mine.

I will tell you what I go.

All colors are typed as clip facing up.
On the same batch of the harness meaning taped together we have.

4pin Red - Red -
Red with Green stripe - White with blue stripe

6pin
Red with white stripe - Red with Green stripe - Red with Green stripe -
Red with Black stripe - * - White

In this batch there is a 2pin connector I would like to know about

2pin
Red with yellow stripe - Red with White stripe

Now in another batch of tape I have 2 more 6 pins relays and a 4 pin.
6pin
* - Black with white stripe - Black with white stripe -
Red with black stripe - * - Red with Yellow stripe

6pin
Green with Red stripe - * - Black -
Black with Yellow stripe - * - *

4pin Black with Yellow stripe - Yellow
Black with White stripe - Black with Red stripe

There is also a white 6 pin test connector in this batch. What is this for? Testing what?

EDIT: I am also including 2 pages from the FSM that I am looking at.

HAILERS

RED..RED....R/G...W/L is still the headlight relay.

R/W, R/G, R/G,R/B is still the Dimmer Relay

There is a six pin one that has Y/B, B/Y, B, G/R and is still a fan relay. You missed one wire call out on that one imho.

Actually, I think I'll stop now. That's a JDM Front harness and i don't think it's going to match my S4 diagrams. So.....disregard.

iceblue

I didn't even notice that I marked on my paper that them 2 I found the match on.

I can only guess can you confirm that. The 6 pin with two blank keys would be the E-fan relay and the last 6pin left over would be the AC relay and the 4pin left over would be the power steering relay.

The FAN relay in the FSM matches the blank spots I have but not the wire colors, the other 2 relays do not match the wire colors but there all thats left over.

iceblue

The only yellow wire I have is in a 4pin connector.

HAILERS

See my last comment on my thread above.

iceblue

This is a S4 harness just to state.

Ok well thank you for your efforts thus far HAILERS.

Can anyone tell me what the 6pin white test connector is for and what happens if I remove it from the harness?

And what the 2pin connector in the bunch is for as well.