identify sensors
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2001
Location: orlando ,fl
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
identify sensors
ive looked in the haynes manual and cannot determine the function of 2 sensors on the lower front and middle part of the engine on the drivers side .
any info will be helpful
any info will be helpful
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
OK...There are several sensors around there....What car? What year? Pictures?
Off hand, located in that general area are the coolent temperature sender, oil pressure, oil temp, oil level (those two are on the pan).
Off hand, located in that general area are the coolent temperature sender, oil pressure, oil temp, oil level (those two are on the pan).
#3
You are probably asking about the oil pressure & water temp sensor...
The oil pressure is on the rear housing. it is a round canister about 1.5 inches in diamiter. the small one to the right of that is the water temp sensor..
If those are not the ones you are asking about, give us some more details...
-Zach
The oil pressure is on the rear housing. it is a round canister about 1.5 inches in diamiter. the small one to the right of that is the water temp sensor..
If those are not the ones you are asking about, give us some more details...
-Zach
#4
Rotary Enthusiast
Thread Starter
Join Date: Mar 2001
Location: orlando ,fl
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
89 turbo ll.............yes they are round and both have only a one wire prong ...........does anyone have a online mazda diagram that i can look at
Thread
Thread Starter
Forum
Replies
Last Post
imitek
3rd Generation Specific (1993-2002)
24
12-01-15 03:35 PM
imitek
3rd Generation Specific (1993-2002)
3
09-22-15 11:29 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM