Ideas for cold air intake with a turbo 2 hood but no turbo :(
#1
Your Daddy
Thread Starter
Join Date: Mar 2001
Location: Stuart, FL
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Ideas for cold air intake with a turbo 2 hood but no turbo :(
i got a turbo 2 hood for free (!) and i'm getting it painted with the stripes and all that. i want to run some sort of hosing along the underside of the hood from the scoop to the air filter and also make a cold air box too. anybody have any ideas like what material and such?
#2
Senior Member
Join Date: Feb 2001
Location: NA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
A free T2 hood, ah hem...and WHY wasn't I informed of this! lol...just use some lightweight aluminum and have an exhaust shop/machine shop bend it for you. Then just use thin aluminum to make the box. As for the design of the whole thing, I can't help ya there...I still have the NA hood!
#3
Rotary Elite
iTrader: (1)
Join Date: Mar 2001
Location: Edmonton, AB
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Construct a duct made of 1/16 or 1/8th inch aluminum, and then rivet it together. Then, but some of that foam tape stuff and seal it all off from the inside, and that should be it! Don't know how you're going to suspend that stuff above the other engine components, but that's what I'd try.
#5
Three spinning triangles
Join Date: Apr 2001
Location: Been all around this world and still call Texas home (Ft Worth)
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
We made one for a friends 96Z28. We opend the holes at the ack of the hood then secured some custom bent aluminum underhood scoops and 2.5" PVC pipes to the hood and built a custom airbox up front to connect to the intake via a 3" pipe. Shutting the hood can be kinda tricky so slamming the hood is out. But it wasnt hard to do and it was actually fun to make.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM