Ideal ALIGNMENT specs??
03-17-07, 03:54 PM
#1
Piston Hater
Thread Starter
Join Date: Aug 2006
Location: Rochester, NY
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Ideal ALIGNMENT specs??
Ok guys, heres what's recommended from the factory, with my actual settings in (parenthesis). Format: Specs will be lowest/highest and my actual specs will be (left/right) side. Does anyone have any recommendations for an average sport-type set up without too much treadwear or driveability sacrafice?
Front
Camber _____-0.20/0.80 (-1.0/0.20)
Toe ________0.00/0.30 (0.17/0.19)
Rear
Camber _____-1.20/-0.20 (-2.20/-1.10)
Toe ________ 0.00/0.30 (0.54/0.88)
Front
Camber _____-0.20/0.80 (-1.0/0.20)
Toe ________0.00/0.30 (0.17/0.19)
Rear
Camber _____-1.20/-0.20 (-2.20/-1.10)
Toe ________ 0.00/0.30 (0.54/0.88)
03-17-07, 04:14 PM
#2
Piston Hater
Thread Starter
Join Date: Aug 2006
Location: Rochester, NY
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
In the next two weeks im going to get all polyurethane (the spelling on that may be off, its St. Patty's Day) bushings, and new hardware. ill drive it back down and align it myself, just wonderin what you guys recommended for setup. Thanks guys!
Thread
Thread Starter
Forum
Replies
Last Post
Spirit Rx-7
Suspension/Wheels/Tires/Brakes
6
03-14-16 12:36 PM
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM