IAT resistance curve
01-27-05, 11:18 PM
#1
Rotary Enthusiast
Thread Starter
IAT resistance curve
Does anyone have the resistance curve for a series 4 turbo intake air temp sensor?
A picture would be nice, but if you even have three points (one cold extreme, one midway, and one hot) that would work too.
A picture would be nice, but if you even have three points (one cold extreme, one midway, and one hot) that would work too.
01-28-05, 01:06 AM
#3
Lives on the Forum
Oops, scratch that...
32F -> 110.9k ohms
50F -> 66.6k ohms
68F -> 41.4k ohms
86F -> 26.5k ohms
104F -> 17.5k ohms
122F -> 11.8k ohms
140F -> 8.2k ohms
158F -> 5.8k ohms
176F -> 4.2k ohms
(All resistance ranges are + or - 10% of spec resistance.)
-Ted
32F -> 110.9k ohms
50F -> 66.6k ohms
68F -> 41.4k ohms
86F -> 26.5k ohms
104F -> 17.5k ohms
122F -> 11.8k ohms
140F -> 8.2k ohms
158F -> 5.8k ohms
176F -> 4.2k ohms
(All resistance ranges are + or - 10% of spec resistance.)
-Ted
01-31-05, 10:37 PM
#6
Rotary Enthusiast
Thread Starter
My friend and I actually swapped a Corrado G60 (supercharged 1.8L) into his 84 Rabbit GTI, and we're running a Megasquirt ECU.
We're also using an RX-7 Turbo air intake temp sensor, so that's why I needed the curve.
We're also using an RX-7 Turbo air intake temp sensor, so that's why I needed the curve.
Thread
Thread Starter
Forum
Replies
Last Post
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
