I think my fcd died
#1
I think my fcd died
I'm pushing about 10 to 12 lbs of boost and have been for about a week. Tonight i tried to get into the boost and the car seems like it is misfiring. I also noticed tonight that my stock boost gauge was registering full boost (usually it doesn't register anything).
I'm going to take the boost controller out in the morning and see if stock boost fixes the problem.
Any other ideas or direction, I need to get it back to normal for work on Monday.
Thanks
I'm going to take the boost controller out in the morning and see if stock boost fixes the problem.
Any other ideas or direction, I need to get it back to normal for work on Monday.
Thanks
#2
i gave my battery a good trickle charge over night and today it works like a champ.
I think the actual problem is that my car isn't running the start map even though I ran a wire from the starter cut solenoid to pin 3b.
On top of that i think it is having some sort of recharging issue as well. I have replaced the alternator, i have gone double pulley/belt and i replaced the battery with an optima red top.
I think the actual problem is that my car isn't running the start map even though I ran a wire from the starter cut solenoid to pin 3b.
On top of that i think it is having some sort of recharging issue as well. I have replaced the alternator, i have gone double pulley/belt and i replaced the battery with an optima red top.
#3
Full Member
Join Date: Dec 2007
Location: victoria, BC
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
check your fuses. i had some issues with a lose 80amp main fuse, its the culprit of ECU issues and charging issues. could be many other things too, but check the simples first.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM