2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

I search but cant find it for this studding!!!

Thread Tools
 
Search this Thread
 
Old 01-14-10, 03:03 PM
  #1  
Teeterin on Grip & Drift

Thread Starter
iTrader: (4)
 
DeMoe Aurelius's Avatar
 
Join Date: May 2008
Location: In the desert!!! Victorville...
Posts: 538
Received 3 Likes on 3 Posts
I search but cant find it for this studding!!!

OK 88 Vert. Air filter R&B header, 24" resonator, 3" Exhaust. It just started this problem the other day (3 Days ago). When in part throttle it baps like a sheep till it catches at times, I get like that mainly on the freeway shiftin to 5th passing a truck at about 3500 Rpm. It does it from time to time in 1st or 2nd gear. Sense my car is now loud as hell I cant leave at WOT cause it gains police attention. is this a fuel or ignition problem. I had to adjust my CAS. due to stalling and I Idle at about 800-900 RPM. I never touched my TPS so I dont think that would be the problem. So any help would be great thanks.
Old 01-14-10, 03:27 PM
  #2  
1308ccs of awesome

iTrader: (9)
 
eage8's Avatar
 
Join Date: Sep 2003
Location: Woodbine, MD
Posts: 6,189
Received 17 Likes on 15 Posts
does it always happen at 3500ish rpm?
Old 01-14-10, 03:54 PM
  #3  
Teeterin on Grip & Drift

Thread Starter
iTrader: (4)
 
DeMoe Aurelius's Avatar
 
Join Date: May 2008
Location: In the desert!!! Victorville...
Posts: 538
Received 3 Likes on 3 Posts
CA

in 5th some time about 3500 at 84MPH it happens in lower gears about 2000 to 3200 10 to 20 mph it's never really at WOT just like just over half throttle. It did the same when I was completely stock. Now I'm no where near stock anf it does the same thing...
Old 01-14-10, 03:56 PM
  #4  
Teeterin on Grip & Drift

Thread Starter
iTrader: (4)
 
DeMoe Aurelius's Avatar
 
Join Date: May 2008
Location: In the desert!!! Victorville...
Posts: 538
Received 3 Likes on 3 Posts
I havent had the 3500 hesitation sense I tuned it the first time I flooded it. about 2 months of having it.
Old 01-14-10, 04:32 PM
  #5  
1308ccs of awesome

iTrader: (9)
 
eage8's Avatar
 
Join Date: Sep 2003
Location: Woodbine, MD
Posts: 6,189
Received 17 Likes on 15 Posts
sounds like you have a bad TPS. I would check it sweep of it with a multimeter and make sure there aren't any dead spots.
Old 01-14-10, 04:42 PM
  #6  
Teeterin on Grip & Drift

Thread Starter
iTrader: (4)
 
DeMoe Aurelius's Avatar
 
Join Date: May 2008
Location: In the desert!!! Victorville...
Posts: 538
Received 3 Likes on 3 Posts
ok thanks!!! I will...
Old 04-15-10, 05:31 PM
  #7  
Teeterin on Grip & Drift

Thread Starter
iTrader: (4)
 
DeMoe Aurelius's Avatar
 
Join Date: May 2008
Location: In the desert!!! Victorville...
Posts: 538
Received 3 Likes on 3 Posts
Sorry I forgot to post that I found the problem. I switched over the Pulse Dampener from S4 to S5 and it was the bolt that was to long and I put washers to tighten it down and the bolt loosened up and was causing a vacuum leak. thanks for all the help!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
runner83
1st Gen General Discussion
16
08-26-15 05:16 PM
Brice_Brice
2nd Generation Specific (1986-1992)
7
08-18-15 10:42 AM



Quick Reply: I search but cant find it for this studding!!!



All times are GMT -5. The time now is 10:38 PM.