I Was Screwed Now I Need Help!!!
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: Townsend,WI
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I Was Screwed Now I Need Help!!!
Well it's been along time since I posted anything new. But I have a HUGE problem ok. I have finished all body work on my 1982 GSL RX7. I put the front cover on the 13b turbo II and also the oil pan. So now that the motor will fit I just need to wire it up thats where my problem is. I bought what I was told was a 13b Turbo II harness turns out it was a regular (non turbo)13b harness. Now I need to know if I can make that harness work on my ECU.
By the way my ECU is a N370
By the way my ECU is a N370
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Get a copy of the Factory Service Manual from the FAQ. This contains the wiring diagrams. You can make it work once you have the diagrams and see what needs to be changed.
#3
Rotary Enthusiast
iTrader: (9)
Join Date: Jun 2003
Location: west
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yellowmazdaman
Well it's been along time since I posted anything new. But I have a HUGE problem ok. I have finished all body work on my 1982 GSL RX7. I put the front cover on the 13b turbo II and also the oil pan. So now that the motor will fit I just need to wire it up thats where my problem is. I bought what I was told was a 13b Turbo II harness turns out it was a regular (non turbo)13b harness. Now I need to know if I can make that harness work on my ECU.
By the way my ECU is a N370
By the way my ECU is a N370
Take the harness back ! You paid for what they said and it's not sooo.....
The ECU is an S5 ECU. If you bought a long block meaning sensors and OMP, it would be easier to use an S5 harness and ECU (that you have). Then, you would just need to wire up the dash.
FSM...
www.iluvmyrx7.com
Thread
Thread Starter
Forum
Replies
Last Post