I Need An Rx7 Expert...!!!!
#1
FC newbie
Thread Starter
Join Date: Feb 2006
Location: Oahu Hawaii, PHOENIX AZ for school!
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I Need An Rx7 Expert...!!!!
ok heres the thing. i started having clutch problems. i would have to pump it a few times in order for it to give back resistance. and then recently it just goes flat to the floor and stays there. i would have to lift it back up with the toe of my shoe then pump it again.
i just changed the master cylinder and tried to bleed it but i still have the same problem. i need some help. the clutch still goes down to the floor. i have no idea what is wrong with it.
i just changed the master cylinder and tried to bleed it but i still have the same problem. i need some help. the clutch still goes down to the floor. i have no idea what is wrong with it.
#3
I'm awesome!
Join Date: Apr 2004
Location: Greenville, SC & Atlanta, GA & Clovis, NM
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Icemark
does the slave cyl move when you push the clutch in???
word.
You probably shoulda just went ahead and changed them both at the same time, its like a $40 part and you might as well do it since you gotta blead it anyways.
#4
It's only Rock and Roll
iTrader: (1)
Join Date: Sep 2004
Location: In a house...
Posts: 2,509
Likes: 0
Received 0 Likes
on
0 Posts
Word is right, he asked for an expert...geeze. Yeah mine sticks to the floor sometimes in the 'vert. I've been too lazy to change them out but you might as do both at the same time. Am I right in remembering that you should use the Mazda remans?
#5
FC newbie
Thread Starter
Join Date: Feb 2006
Location: Oahu Hawaii, PHOENIX AZ for school!
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
what do you mean if its moves? well my dad said that nothing was coming out when we were trying to bleed it so i dont know if thats any help.