I need help FC owners...
#1
Full Member
Thread Starter
Join Date: Jul 2005
Location: adelaide
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
I need help FC owners...
Could someone with the stock FC emissions/twinscroll etc solenoid rack still on their car take a picture for me so i can see what solenoids got what signals from which metal vac lines. Mine was removed & i need to re-install them.
Also if the twin scroll solenoid has been removed, what affects would this have on boost if...
a) the lines were capped so that no signal goes to the twin scroll
b) the solenoid is removed, but the two lines that go into the solenoid are joined togther?
Any help would be greatly appreciated,
Regards
Greg
Also if the twin scroll solenoid has been removed, what affects would this have on boost if...
a) the lines were capped so that no signal goes to the twin scroll
b) the solenoid is removed, but the two lines that go into the solenoid are joined togther?
Any help would be greatly appreciated,
Regards
Greg
#2
Senior Member
Here are some pictures if you scroll down all the way to the bottom of the first page of the thread. I believe there are more pics on the following pages. Be sure to read Hailer's posts, because one of the lines is shown wrong in one of the pics.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/turbo-ii-vacuum-line-help-520634/
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/turbo-ii-vacuum-line-help-520634/
Last edited by buttsjim; 01-12-07 at 05:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post