2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

i need help

Thread Tools
 
Search this Thread
 
Old Mar 26, 2010 | 09:45 PM
  #1  
TenthYear's Avatar
Thread Starter
Recycle, get a turbo!
Tenured Member: 15 Years
iTrader: (1)
 
Joined: Jun 2006
Posts: 68
Likes: 0
From: Calimesa, Cali
i need help

my car has been down for a week now and i cant figure it out. it just crapped out while i was getting on the freeway, it felt like i lost 90% of power, started backfiring a bit and i pulled over. i couldn't find anything immediately wrong at the scene, and had to get towed home.

now it wont even start. i have spark, it's getting fuel. i just checked the compression by pulling plugs. the rear rotor i can hear great, but the front i can't hear anything. it's hard for me to believe the motor could have blown, because i just put in a jdm s5 swap about 4 or 5 months ago and it has been running very well. also has been running rather rich, and i thought that would prevent this sort of thing?

so this is where i am at, at the moment. any ideas???

thanks,
Jake
Reply
Old Mar 26, 2010 | 10:36 PM
  #2  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
If you hear nothing from the front rotor, why is it hard to believe that it blew?
Remove your "beliefs" from the situation and begin gathering some hard data...like a compression test.
Reply
Old Mar 26, 2010 | 10:44 PM
  #3  
TenthYear's Avatar
Thread Starter
Recycle, get a turbo!
Tenured Member: 15 Years
iTrader: (1)
 
Joined: Jun 2006
Posts: 68
Likes: 0
From: Calimesa, Cali
got my hands on a compression tester.

front rotor = 0 psi

think i found the problem

delete thread
Reply




All times are GMT -5. The time now is 11:03 AM.