ok this will take a while. car had a pd problem that caused an engine fire but it was put out within 30 sec. it melted 2 omp lines so i pulled the all the intake off and cleaned everything. i removed the rats nest. i also did the tb mod and ported the intake properly only 2 thousanths. reinstalled everything and started it it started out idling at 6k. adjusted the tb and got it down to 2k did not adjust tps. then tryed to move the cas but it seemed stuck. Wiggled the cas around till it would move. now that everything is back together and the cas is adjusted to factory specs it will not start.

 

btw way before anyone says it yes i have searched and checked the fuses and all the connectors everything is hooked up and no blown fuses battery has a strong 12.6 volts it turns over but not catching oh and it has compression on both 1 and 2