how to wire up a 3rd gen tps to a s5 stock ecu
#1
Rotary Enthusiast
Thread Starter
Join Date: Nov 2003
Location: orlando, fl.
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
how to wire up a 3rd gen tps to a s5 stock ecu
this is for anybody who plans on doing the fd uim, tb, tps swap onto there s5 and still plan on using the stock ecu, it was a nice pain in the *** to figure out so i hope this helps someone in the future
fd tps with tab facing up from left to right
pin 1= brown/black
pin 2= green/red
pin 3= brown/white
pin 4= black/green
2 wires will be left over, just leave them disonnected (brown/black & brown/white)
thanx to reted,nzconvertible and silverrotor for helping me figure this out
fd tps with tab facing up from left to right
pin 1= brown/black
pin 2= green/red
pin 3= brown/white
pin 4= black/green
2 wires will be left over, just leave them disonnected (brown/black & brown/white)
thanx to reted,nzconvertible and silverrotor for helping me figure this out
Trending Topics
#10
Lives on the Forum
hehe, I wasn't talking about you...
I can't confirm if the FD intake manifold can fit on a Zenki turbo LIM.
Sorry.
I think that swap is a royal pain in the *** and is not worth it.
-Ted
I can't confirm if the FD intake manifold can fit on a Zenki turbo LIM.
Sorry.
I think that swap is a royal pain in the *** and is not worth it.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM