How to test the rear wiper motor?
#1
Senior Member
Thread Starter
Join Date: Jun 2003
Location: ...
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
How to test the rear wiper motor?
just wondering what the thread says...
How do I test the rear wiper motor?
Am I looking for a certain ohm resistance?
chances are its the switch though im guessing...
How do I test the rear wiper motor?
Am I looking for a certain ohm resistance?
chances are its the switch though im guessing...
#2
WTF
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
ok to test the wiring harness get your DMM and shove the postive lead into the light green/yellow wire of the wiper plug and the black lead to ground, with the igntion switch ON.
If there is no voltage check the fuse or repair the wiring harness.
to test the motor itself and not just the wiring harness connect the positive lead from a 12v battery to the same light green/yellow wire connect the negative lead from the battery to the brown/red wire and it should activate the motor
If there is no voltage check the fuse or repair the wiring harness.
to test the motor itself and not just the wiring harness connect the positive lead from a 12v battery to the same light green/yellow wire connect the negative lead from the battery to the brown/red wire and it should activate the motor
Last edited by Rotory; 03-15-04 at 05:46 PM.