How to replace the the wiper switch?
Thread Starter
Rotary Enthusiast
Joined: Jan 2007
Posts: 1,026
Likes: 0
From: California
How to replace the the wiper switch?
My wiper only works when it is on low and on the fast it just stop? why? what can I do to fix it, I'm newbie to this. thanks for looking and reply 
I'm a boost creep...
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
heres the thread that was started when i was looking for one.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/wiper-switch-596944/
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/wiper-switch-596944/
HAILERS
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
It's a bad relay. It iwll be the BOTTOM relay in the switch. Replace same. Part number G6C-2117P-US-DC12 and order it from MOUSER. Find MOUSER in a Google search and order it.
It has to be soldered in and ALSO you have to desolder the old relay. Use care or you'll runin the traces on the board. Even then you can still fix it by doing what Sureshot did. Research to see what SureShot did. Done.
It has to be soldered in and ALSO you have to desolder the old relay. Use care or you'll runin the traces on the board. Even then you can still fix it by doing what Sureshot did. Research to see what SureShot did. Done.
