how much would replacing all coolant hoses cost?
#1
aim** JI II IM IM Y
Thread Starter
Join Date: May 2005
Location: 90703 cerritos california
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
how much would replacing all coolant hoses cost?
i was wondering how much it would be the get all my coolant hoses replaced.
im not talkin about me buying the hoses and do it myself.
im talkin about getting it done.
im askin for a ballpark estimate so i can start saving money.
thx
-jimmy
im not talkin about me buying the hoses and do it myself.
im talkin about getting it done.
im askin for a ballpark estimate so i can start saving money.
thx
-jimmy
#2
I "lost" my emissions....
why not do it your self its easy as hell, 20 minutes and 20 bucks later.... or spend 140-160 bucks and a few hours getting it done, your choice...
#4
Lives on the Forum
Upper radiator hose - $30
Lower radiator hose - $20
Lower radiator outlet to metal heater pipe - $10
Passenger side heater hose to heater firewall outlet - $30
Driver side heater hose to heater firewall inlet - $30
Stupid 90-degree hose under UIM - $10
TB to BAC valve - $30
BAC valve to water pump housing - $30
And if you're turbo, there's the turbo return to water pump housing - $20
I'm not mentioning the radiator bypass cap to overflow reservior cause it's generic hose...
The prices are on the high side, so you shouldn't break $200 total for everything.
Add 4 - 5 hours of shop labor, and you're looking at about a $500 job for parts and labor.
-Ted
Lower radiator hose - $20
Lower radiator outlet to metal heater pipe - $10
Passenger side heater hose to heater firewall outlet - $30
Driver side heater hose to heater firewall inlet - $30
Stupid 90-degree hose under UIM - $10
TB to BAC valve - $30
BAC valve to water pump housing - $30
And if you're turbo, there's the turbo return to water pump housing - $20
I'm not mentioning the radiator bypass cap to overflow reservior cause it's generic hose...
The prices are on the high side, so you shouldn't break $200 total for everything.
Add 4 - 5 hours of shop labor, and you're looking at about a $500 job for parts and labor.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM