2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

How much boost can stock 10th Ann fuel system handle?

Thread Tools
 
Search this Thread
 
Old 06-05-05, 06:08 PM
  #1  
Junior Member

Thread Starter
 
Veovius's Avatar
 
Join Date: Apr 2004
Location: Victoria BC
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
How much boost can stock 10th Ann fuel system handle?

As topic, just wondering how far you can go on a stock TII (10th ann), before needing fuel mods....
Old 06-05-05, 06:23 PM
  #2  
Passing life by

 
iceblue's Avatar
 
Join Date: Feb 2005
Location: Scotland, USA
Posts: 4,028
Likes: 0
Received 2 Likes on 2 Posts
Take 120$ and upgrade it now :-)
Old 06-05-05, 06:26 PM
  #3  
(_8(|)

 
88t2romad's Avatar
 
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes on 0 Posts
i wouldnt go above 10 psi on a reg basis, but just be safe and put in some 720's and a rtek 1.7
Old 06-05-05, 10:25 PM
  #4  
Lives on the Forum

 
RETed's Avatar
 
Join Date: Feb 2001
Location: n
Posts: 26,664
Likes: 0
Received 16 Likes on 15 Posts
First of all, the 10AE is just another Zenki FC turbo with special badging.
Mazda did not change out any of the engine or fuel systems on the 10AE compared to any of the other 1986 to 1988 FC turbos.

With that said, the stock fuel system barely can support 240hp at the wheels, DynoJet.
Stock fuel pump and fuel injectors all max out about the same time - about 250bhp flywheel.


-Ted
Old 07-23-05, 10:57 AM
  #5  
Rotating Performance.

iTrader: (42)
 
cr7684's Avatar
 
Join Date: Jul 2005
Location: Miami, FL.
Posts: 1,820
Likes: 0
Received 0 Likes on 0 Posts
put in a f/c/d do not boost more then 9psi.




All times are GMT -5. The time now is 09:57 AM.