I picked up a used Mazdatrix triangulated strut bar. Does anyone have the instructions or suggestions for installing it? I know a lot of stuff has to come off the firewall and instructions would be a lot easier than trying to piece everything together. Thanks.

 

I don't have it, but i figure you'd have to mount the towers first, mark the drill holes for the firewall, check for clearnce. Remove the dash and selector (unless they're just metal screws and you don't need to bolt them in... or you could just weld them in) drill the holes through, mount up the brace, cut any excess bolts then put everything back in... It's either that or you just have to take off the cowl and drill and bolt in on there. I can't really tell from the pictures (but that's my best guess anyways).