After getting my car to run right. I wanted to install some additional parts to the car. First, I need to install the HKS F-con and HKS FCD. The f-con is plug and play, but the HKS FCD has 4 wires, red, white, yellow, and black and I got no idea which wires they splice in to. Pics of install will help me out a lot. Any help would be great. Thanks.

 

im waiting for this too.

 

red for 12V ign hot
black for any ground, chassis, harness, whatever

now cut the pressure sensor line in half on the harness

connect yellow on the wire that goes to the ecu
and white on the wire that goes to the press sensor

easy!

 

thanks alan.

 

what colour is the pressure sensor wire?? i installed it on the brown with red at the ECU according to the HKS wiring diagram and its not working

 

On the series 5 there are 3 wires brown (MAP power) brown white stripe (MAP neg) and a green wire (MAP Signal)

Cut the green wire, wire FCD accordingly.

I have my FCD set to 7 which is aprrox 10psi before it clamps, dont set it any lower.

 

hello. Could someone tell me in the diagram where to connect the yellow and white wires. I'm instaling it in S4 turbo2.Thank you