How does the back seat on a 2+2 come out?
#1
Eager to please
Thread Starter
Join Date: Mar 2002
Location: Palm City, G'ville
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
How does the back seat on a 2+2 come out?
I am trying to get the back seat out of my RX-7 that I wrecked, and I cant seem to figure out how the back seat is held in. Any one know how to get it out?
#2
Full Member
Join Date: Mar 2002
Location: kittery, maine
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
i tried to remove one froma junkyrad once...i couldn't get it out with out ripping the seat apart..the junkyard still has the seat so if anyone knows an easy way i would also like to know.
#3
Senior Member
Join Date: May 2001
Location: Thunder Bay, Ontario, Canada
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
it's easy, there are two bolts between the two sections of the top and bottom which are seprerate pieces. That takes off the bottom with some simple hook which slide out once you get the bolts off. The top.....hmmm, can't remember, it's pretty simple though
#6
On the bottom part of the "bucket" part of the seat there is a hook on each side. pull the bottom of the seat up a little and you will be able to find the hook. You will have to pull up and push to the rear of the car to unhook it. There is one of these on each side. after you get that the bottom section will be loose and you will be able to access the bolts that attach seatbelts and the four bolts that actually attach the seats to the car. It is very straight forward after you get the annoying J- hook things.