HOW Do i TIME my 13B..Timing must be off
Thread Starter
Rotary Enthusiast
Joined: Apr 2004
Posts: 908
Likes: 0
From: King of the road
HOW Do i TIME my 13B..Timing must be off
I tryed the other day to time my 88Gxl...The problem is where the hell is the timing mark? and also what spark plug wire do i put the sensor on...Also I change Timing with the Crank angle senser Right? But the Crank angel sensor has this Plastic Peice that just turns i cant seem to get it off so i can get the crank angle senser loose.. anyone have these problems!
Rotorphile.
Joined: Mar 2002
Posts: 1,296
Likes: 0
From: Richmond/NoVA
The timing mark is on the main pulley.
Time the leading from either leading wire, they fire at the same time.
Time the trailing from the #1 trailing wire.
The CAS is only held in by one 10mm bolt. Loosen that and tap it to whichever side with a hammer to adjust it.
Time the leading from either leading wire, they fire at the same time.
Time the trailing from the #1 trailing wire.
The CAS is only held in by one 10mm bolt. Loosen that and tap it to whichever side with a hammer to adjust it.
The Haynes manual says the timing mark is the yellow one on the main (fan,etc) pulley. The yellow color is long gone on mine though so check closely for something like a small dent.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
Nov 9, 2015 01:15 PM
