2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

How Do I Remove The Fender?

Thread Tools
 
Search this Thread
 
Old May 26, 2007 | 10:19 PM
  #1  
killinit937's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2007
Posts: 304
Likes: 0
From: springfield, ohio
How Do I Remove The Fender?

does anyone have a clue on how many bolts are on the s4 fenders and what all body parts i need to remove. i.e. doors? bumper? hood?
any input is greatly apreciated
thanks,
keith
Reply
Old May 26, 2007 | 11:22 PM
  #2  
AcidAngel7477's Avatar
We're All Fkd..
Tenured Member: 15 Years
Liked
iTrader: (16)
 
Joined: Nov 2005
Posts: 8,727
Likes: 3
From: Whittier,CA
you dont need to remove anything to take off the fender, pop the hood open the door all the way, you will see the fender bolts there should be two by the door three/four at the top and two at the bottom right of the fender and i think theres some at the bottom front, there 10mm bolts..

:AA:
Reply
Old May 26, 2007 | 11:24 PM
  #3  
Turbo II Rotor's Avatar
Who Shot the Sheriff?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 3,858
Likes: 2
From: Aurora, CO
Take the plastic inner fender out first. Then take out the bolts that hold the fender on. I believe they are either 10 or 12mm. Soak them with pb blast before you do it.
Reply
Old May 27, 2007 | 07:50 PM
  #4  
killinit937's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2007
Posts: 304
Likes: 0
From: springfield, ohio
thanks i have about 5 broken bolts.
Reply
Old May 27, 2007 | 08:01 PM
  #5  
That Rx-7 kid's Avatar
car fanatic
Tenured Member 10 Years
 
Joined: Aug 2006
Posts: 628
Likes: 0
From: northern new jersey
Originally Posted by killinit937
how do I remove the fender?
lol very carefully.........
Reply
Old May 27, 2007 | 09:48 PM
  #6  
Turbo II Rotor's Avatar
Who Shot the Sheriff?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 3,858
Likes: 2
From: Aurora, CO
Are you replacing the fender or taking dents out?
Reply
Old May 27, 2007 | 09:52 PM
  #7  
staticguitar313's Avatar
R.I.P. Icemark
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Sep 2004
Posts: 4,229
Likes: 1
From: gilbert, arizona
you have to remove or pull the front bumper away on that side as well, it is required
Reply
Old May 28, 2007 | 12:03 AM
  #8  
killinit937's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2007
Posts: 304
Likes: 0
From: springfield, ohio
replacing it. thanks.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
Sep 7, 2015 01:11 PM




All times are GMT -5. The time now is 09:08 PM.