2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

How do I check my secondary injectors??

Thread Tools
 
Search this Thread
 
Old 01-17-07, 09:51 AM
  #1  
Full Member

Thread Starter
 
Bison Asko's Avatar
 
Join Date: Nov 2006
Location: NC
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
How do I check my secondary injectors??

I have a '86' n/a and I just replaced my injectors a few days ago, when i took it for a test run, the car did something strange. Once I hit 4k rpm it died for a sec and then shot off with amazing power. It only did this once. I upgraded the secondary injectors from 420cc to 550cc. I am pretty sure they are the independence(low) but who knows. Now the hesitation is gone but I dont feel the power I felt before. I just wanted to get the specifications to make sure the injectors are at the right Ohms and also test to make sure they are comming on when they are suppose to.
Old 01-17-07, 09:53 AM
  #2  
affen

 
speed_monkey's Avatar
 
Join Date: Sep 2004
Location: Tucson, AZ
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Do you have anything to tune the fuel with?? 550's untuned in a n/a will cause it to run pretty rich :p

stock n/a injectors are 460cc btw
Old 01-17-07, 10:22 AM
  #3  
Rotaries confuse me

iTrader: (7)
 
My5ABaby's Avatar
 
Join Date: May 2006
Location: Murfreesboro, TN
Posts: 4,219
Likes: 0
Received 3 Likes on 3 Posts
550cc injectors do nothing but hurt your N/A. Put the stock 460cc injectors back in. They're good for something like 200rwhp which I'm sure you're not even coming close to touching. They're also made for the ECU that you're using.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
Snoopy FD
Build Threads
25
12-08-15 01:45 PM



Quick Reply: How do I check my secondary injectors??



All times are GMT -5. The time now is 12:02 AM.