2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

How do I cank my engine?

Thread Tools
 
Search this Thread
 
Old Nov 6, 2003 | 09:45 AM
  #1  
vrooom305's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 132
Likes: 0
From: USA
How do I cank my engine?

My car is a 1986 N/A Automatic. I've been thinking about doing the ATF trick since my car has about 135k miles on it. From what I read about doing the ATF trick it's a good thing to crank the engine, but I just don't know how to do it

Thanks

Last edited by vrooom305; Nov 6, 2003 at 09:51 AM.
Reply
Old Nov 6, 2003 | 09:52 AM
  #2  
1987RX7guy's Avatar
Eat Rice Don't Drive it.
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
No do the water trick ATF can ruin your seals. Get a gallon jug and fill it with water. with the car running rev it to 3k and have a friend hold it for you while you uncap a vacume hose and put itn into the jug. lease it untill the watter is all gone.
Reply
Old Nov 6, 2003 | 10:21 AM
  #3  
vegeta6263's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 456
Likes: 0
From: Gainesville, FL
is the starter clicking at all? take out the top sprak plugs, an dget someone to ground one of them and see if they see any spark.. if they dont it might be a dead or low volage battery/ starter. i had to replace the starter on mine. check the fuses under the hood, especially the main one.
Reply
Old Nov 6, 2003 | 10:26 AM
  #4  
vegeta6263's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 456
Likes: 0
From: Gainesville, FL
also there is a main ground under the front coil. take the coil out ( the coil is the thing that holds the 2 top spark plugs) and their shoudl be a ground sticking to the frame of teh car take it out and use some sandpaper or wire brush and clean it out.. try checking the voltage on the CRANk angle sensor and all the possible wires you can if that doesnt work.. post results ill try to help out.
Reply
Old Nov 6, 2003 | 10:32 AM
  #5  
vrooom305's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 132
Likes: 0
From: USA
Originally posted by vegeta6263
also there is a main ground under the front coil. take the coil out ( the coil is the thing that holds the 2 top spark plugs) and their shoudl be a ground sticking to the frame of teh car take it out and use some sandpaper or wire brush and clean it out.. try checking the voltage on the CRANk angle sensor and all the possible wires you can if that doesnt work.. post results ill try to help out.

My engine start I just wanted to know how to crank it without fireing up the engine so I can do the ATF trick. But 1987RX7guy suggested to do the water trick instead.

Ok, I guess my question is what vacume do I use for the water trick? Where does it hook up to in the engine?

Thanks Again
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
Wicked93gs
Other Engine Conversions - non V-8
0
Aug 23, 2015 10:14 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 02:22 PM.