How to build 700-1000 hp 30 psi boost 13b?
02-18-02, 10:14 AM
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: maimi
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
How to build 700-1000 hp 30 psi boost 13b?
How do i build 700-1000hp 30 psi boost 13b motor.
1. Which apex seals?
2. Which flywheel?
3 And all other parts.
I think Abel Abbara has that motor, does anyone know what parts he uses?
1. Which apex seals?
2. Which flywheel?
3 And all other parts.
I think Abel Abbara has that motor, does anyone know what parts he uses?
02-18-02, 04:20 PM
#3
Rotary Enthusiast
Not that much of a deal... This is the easy way: 3rd gen engine, ported on both ex. and int. Jay-Tec intake manifold, Haltech, methanol, Turbonetics T-series, G-Force tranny, Ford rear end and a few things...
02-18-02, 05:45 PM
#4
AKA Poindexter
iTrader: (2)
Join Date: Apr 2001
Location: Austin, TX; JABLAM!, WA; Iraq
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Angel Guard Racing Team
Not that much of a deal... This is the easy way: 3rd gen engine, ported on both ex. and int. Jay-Tec intake manifold, Haltech, methanol, Turbonetics T-series, G-Force tranny, Ford rear end and a few things...
Not that much of a deal... This is the easy way: 3rd gen engine, ported on both ex. and int. Jay-Tec intake manifold, Haltech, methanol, Turbonetics T-series, G-Force tranny, Ford rear end and a few things...
Do you have a website for Jay-tec? or at least a vendor that sells their products?
02-18-02, 06:27 PM
#5
Senior Member
Join Date: Feb 2001
Location: NA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
When I rebuild my GTX over the summer(after I'm done playing w/ the stock port right now) I'm going to do all custom porting to it and have that big 'ol purdy T88 on the side for kicks..I'm hoping to build it up in the 800HP range....just gotta get my shop open, lol.
02-18-02, 08:47 PM
#7
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Originally posted by BigWoogie
Do you have a website for Jay-tec? or at least a vendor that sells their products?
Do you have a website for Jay-tec? or at least a vendor that sells their products?
http://www.jay-tech.com/default.htm
I think that they recently went out of business, but I'm not sure.
They had great stuff BTW. The exhaust manifold flange on my 20B was made from two of their 13B flanges.
Trending Topics
02-18-02, 11:58 PM
#8
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to build 700-1000 hp 30 psi boost 13b?
Originally posted by vadym
How do i build 700-1000hp 30 psi boost 13b motor.
1. Which apex seals?
2. Which flywheel?
3 And all other parts.
I think Abel Abbara has that motor, does anyone know what parts he uses?
How do i build 700-1000hp 30 psi boost 13b motor.
1. Which apex seals?
2. Which flywheel?
3 And all other parts.
I think Abel Abbara has that motor, does anyone know what parts he uses?
02-19-02, 01:05 AM
#9
Undercover
Join Date: Aug 2001
Location: Ohio
Posts: 1,983
Likes: 0
Received 0 Likes
on
0 Posts
Um sorry but 1000hp engine == about 10 secs. to pull up and then go down a quarter mile. rotary's dont run 30 lbs. for more than that. they run 10-15 daily but over that they only last about a week when run that high all the time. I doubt you could run 30lbs on any apex seals for more than a minute at a time.
CJG
CJG
02-19-02, 02:50 AM
#10
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rotortuner
Um sorry but 1000hp engine == about 10 secs. to pull up and then go down a quarter mile. rotary's dont run 30 lbs. for more than that. they run 10-15 daily but over that they only last about a week when run that high all the time. I doubt you could run 30lbs on any apex seals for more than a minute at a time.
CJG
Um sorry but 1000hp engine == about 10 secs. to pull up and then go down a quarter mile. rotary's dont run 30 lbs. for more than that. they run 10-15 daily but over that they only last about a week when run that high all the time. I doubt you could run 30lbs on any apex seals for more than a minute at a time.
CJG
Peter would do it on stock 3 piece 2 mm apex seals too i bet ya
02-19-02, 10:58 AM
#12
Banned
Originally posted by maxpesce
How do you build a 1000hp 13b?
the question is not so much how as HOW OFFEN!
and the answer is AFTER EVERY RACE!
How do you build a 1000hp 13b?
the question is not so much how as HOW OFFEN!
and the answer is AFTER EVERY RACE!
It could be done...but as soon as you got down the track...you have to start all over again
02-19-02, 12:49 PM
#13
mad scientist
Crispeed is making 651 rwhp on a partial bridgeport motor at 31 or 32 PSI with a small shot of NOS. And Im pretty sure that motor lasted the whole season with no problems. Its all in the tuning.
02-19-02, 02:53 PM
#17
Ex fd *****
Originally posted by mazdaspeed7
651 RWHP is 813 bhp with 20% driveline loss. He did not say 1000 rwhp.
651 RWHP is 813 bhp with 20% driveline loss. He did not say 1000 rwhp.
and any Race Car (like chrispeeds) should only have drivline losses in the 10% or less range
02-19-02, 03:24 PM
#18
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by maxpesce
...and any Race Car (like chrispeeds) should only have drivline losses in the 10% or less range
...and any Race Car (like chrispeeds) should only have drivline losses in the 10% or less range
02-20-02, 01:57 AM
#20
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mazdaspeed7
651 RWHP is 813 bhp with 20% driveline loss. He did not say 1000 rwhp.
651 RWHP is 813 bhp with 20% driveline loss. He did not say 1000 rwhp.
02-20-02, 02:44 AM
#21
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mazdaspeed7
651 RWHP is 813 bhp with 20% driveline loss. He did not say 1000 rwhp.
651 RWHP is 813 bhp with 20% driveline loss. He did not say 1000 rwhp.
Do i need to remind you that it was done on a Dyno Jet dyno which reads 15% less than flywheel? thats 756Hp at the flywheel
02-20-02, 02:46 AM
#22
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by maxpesce
That's still 187hp short of 1000hp and any Race Car (like chrispeeds) should only have drivline losses in the 10% or less range
That's still 187hp short of 1000hp
and any Race Car (like chrispeeds) should only have drivline losses in the 10% or less range
Dyno jet system = 15% less at the wheell
Dyno Dynamics = 27% less at the wheels
02-20-02, 02:47 AM
#23
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Scott 89t2
once you get higer numbers the % goes way down. power is lost to heat. just think how hot your tranny and rear end would get if they had 160hp worth of heat in them. they'd melt in 2 secs. it wouldn't be much more then 700 at the crank.
once you get higer numbers the % goes way down. power is lost to heat. just think how hot your tranny and rear end would get if they had 160hp worth of heat in them. they'd melt in 2 secs. it wouldn't be much more then 700 at the crank.
02-20-02, 02:49 AM
#24
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
i should also point out that Peter's 13B PPT makes 830HP with no extra dowels and he has plans for more boost, higher octane gas and reckons it should easily break the 1000HP mark
