hotwiring starter
#1
Full Member
Thread Starter
Join Date: May 2006
Location: Grand Prairie
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
hotwiring starter
How would I wire the ignition column to the starter, on a 91 na rx7? I've spent all day researching, and i want kinda like a write up.
I would have to splice into the ignition column the wire that already goes into the clutch neutral safety switch, and run a wire directly to the starter. Then would i conect that wire to the left connector on the starter itself right? cause the right one where the soleinaid(spelling?) gets power?
So basicly i need a write up of how to bypass the neutral safetly switch, because i the p.o. installed an after market alarm, which didnt work when i bought the car, and made a electrical mess under the dash.
I found the neutral saftely switch and i cant seem to find any wires going to it or from it, all i see is a box with a switch, not any pigtail connectors like i read about.
I would have to splice into the ignition column the wire that already goes into the clutch neutral safety switch, and run a wire directly to the starter. Then would i conect that wire to the left connector on the starter itself right? cause the right one where the soleinaid(spelling?) gets power?
So basicly i need a write up of how to bypass the neutral safetly switch, because i the p.o. installed an after market alarm, which didnt work when i bought the car, and made a electrical mess under the dash.
I found the neutral saftely switch and i cant seem to find any wires going to it or from it, all i see is a box with a switch, not any pigtail connectors like i read about.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM