2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

hot starting problems........

Thread Tools
 
Search this Thread
 
Old Mar 16, 2006 | 05:10 PM
  #1  
TwiztedAshes's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2006
Posts: 6
Likes: 0
From: Maine
hot starting problems........

1989 s5 with vdi intake the car runs great drive it around shut it off and try to start it back up it wont start unless i pump it?..........if it starts at all
let the car sit for about 30 min and it will start right back up..............anyone have any ideas?
Reply
Old Mar 16, 2006 | 05:25 PM
  #2  
slimjim16's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Aug 2003
Posts: 127
Likes: 0
From: nanaimo ,BC ,canada
my guess , leaky injectors causing flooding my car does the same thing sometimes put in a fuelpump cut switch (which is just a bandaid) shut the car down by cutting off the fuel when its warm, then turn it over until it pops and flip the fuel pump back on it works like a charm. just and ider
Reply
Old Mar 16, 2006 | 07:03 PM
  #3  
rx7idgit's Avatar
Full Member
Tenured Member 10 Years
 
Joined: May 2005
Posts: 153
Likes: 0
From: College Station, Tx
Or you could be simpler with it and just install an mazdatrix H--pipe(also a bandaid)
Reply
Old Mar 16, 2006 | 07:17 PM
  #4  
CrackHeadMel's Avatar
Learned alot | Alot to go
Tenured Member 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
Most common problem is leaky injectors. fix it right, fix it once, send themout to be cleaned

http://rceng.com/service.htm

-Jacob
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 10:16 AM.