2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

hot start issue

Thread Tools
 
Search this Thread
 
Old May 30, 2008 | 01:31 PM
  #1  
turboIIrotary's Avatar
Thread Starter
Rotary Freak
Tenured Member: 15 Years
iTrader: (9)
 
Joined: Feb 2007
Posts: 2,618
Likes: 3
From: dayton,ohio
hot start issue

yes i know i know it has been covered a million times and i think i have read abut it a million times but my car is still doing it.
i have cleaned the injectors and found out one was leaking but this didn't help also my motor has 100 on each face this was done with a real compression tester.
i removed the 3b pin from my ecu to see if this will fix it but that also didn't work it just made me have cold starts.

so im thinking there is still fuel leaking into my engine somehow i know my car will start when hot because i can turn off my car at full operating temp and two seconds later it will start but if i would wait let say a minute it won't.

now i dont think my pulsation damper has been changed is there some way fuel can go through the vacuum line and enter there?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
FB_Frank85
1st Generation Specific (1979-1985)
6
Aug 31, 2015 03:31 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 07:22 PM.