HKS turbo timer
Thread Starter
Full Member
Joined: Oct 2006
Posts: 127
Likes: 0
From: Indiana
HKS turbo timer
Anyone know how to hard wire this?? I've done research and found nothing. Even have the hks instructions that show what wires are for what but there hooked up and it doesn't work?? Any suggestions???
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
I presume it at least lights up.
Is the hand brake wire connected?
Without it's ground, the timer will not start.
I think that unit also has to learn whether the hand brake switch is NO or NC.
When I first did mine, I used the FSM's ignition switch plug diagram and forgot I was looking at the switch side in the manual, and the harness side in the car.
So- recheck your wiring.
Is the hand brake wire connected?
Without it's ground, the timer will not start.
I think that unit also has to learn whether the hand brake switch is NO or NC.
When I first did mine, I used the FSM's ignition switch plug diagram and forgot I was looking at the switch side in the manual, and the harness side in the car.
So- recheck your wiring.
