hks egt install?
#1
hks egt install?
so far I've wired all my gauges that where in the car before I totally gutted the car and redid the interior. The reason this is such a major feat for me is because I had to yank all the old wiring and threw it away because it was old and needed to be done. SO all the wires where cut and the install of these gauges where done by someone before me so I had no Idea how to wire anything. Anyways I took about a week and I've got all of them installed, rewired and last but not least, working!!! Well the only thing I'm having troubles with is my hks exhaust temp gauge. Does anyone have this and know what goes where? I have the thick wire that goes to the down pipe but there are also some other wires I'm supposing needs to go to ground and possitive but I'm not sure. Any help would be great! Thanks.
#5
Moderator
iTrader: (1)
If It's anything like the GReddy EGT Gauge, I followed It like this:
-12V Power Source Line (Red) - tapped Into cigarette Lighter positive.
-Ignition Line (Orange) - Same as above.
-Parking Light Source (White) - Cigarette Lighter Light bulb (positive).
-Ground Line (Black) Either the Cigarette Lighter or It's Bulb. (negative). I choose the former.
What I bracketed was the actual colour of the wire. You may want to confirm with your Manual If this coincides. Fini!
-12V Power Source Line (Red) - tapped Into cigarette Lighter positive.
-Ignition Line (Orange) - Same as above.
-Parking Light Source (White) - Cigarette Lighter Light bulb (positive).
-Ground Line (Black) Either the Cigarette Lighter or It's Bulb. (negative). I choose the former.
What I bracketed was the actual colour of the wire. You may want to confirm with your Manual If this coincides. Fini!
Thread
Thread Starter
Forum
Replies
Last Post
Megasquirt timing map and EGt ?? what do you guys think
immanuel__7
Megasquirt Forum
3
08-22-15 09:34 PM