Hissing sound from primary injectors, air or leak?
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Norway
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Hissing sound from primary injectors, air or leak?
as the title says really. Is this leak between the big rubber ring and out, or is this air I hear coming out?
#2
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Norway
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Bump! I changed the o rings on the air bleeds, tried spacing out the grommets with an o ring, nothing helps.
As far as I see, I need new injectors and maybe a new rail as well, the bolt hole area might be bent for what I know.
As far as I see, I need new injectors and maybe a new rail as well, the bolt hole area might be bent for what I know.
#5
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Norway
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Sorry didn't mention it, but the sound comes in pulses like when the injector is... injecting gas into the engine. Conventiently telling me the leak is on the manifold side, not the fuel rail side of the injector.
I tried swapping the o rings on the air bleeds as I said, same thing. It is slack in the injectors up/down (you can turn them a bit easier than the secondary injectors).
I haven't tried swapping primary and secondary, I take they are the same on the FC?
Stock injectors btw.
I tried swapping the o rings on the air bleeds as I said, same thing. It is slack in the injectors up/down (you can turn them a bit easier than the secondary injectors).
I haven't tried swapping primary and secondary, I take they are the same on the FC?
Stock injectors btw.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM