hiding vacuum lines!
02-05-04, 07:42 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Okinawa
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
hiding vacuum lines!
i dont kno wher i can hide tha vacuum hose going 2 my boost gauge...wher u guyz put ur boost gauge, & wher do u guyz hide tha vacuum hose?
02-05-04, 08:25 AM
#2
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
uuuhhhh... the boost gauges usually come with a nylon line, I got mine in an A-Pillar pod, the nylon line runs up under the a-pillar (have to cut a hole in the a-pillar)
A lot of guys put the gauges in the space under the stereo, you just run the line up under the dash.
In the engine bay, I just T-eed the line to my pressure sensor, and then ran the same yellow silicone vaccume line over to the grommet in the firewall where the nylon line came out.
A lot of guys put the gauges in the space under the stereo, you just run the line up under the dash.
In the engine bay, I just T-eed the line to my pressure sensor, and then ran the same yellow silicone vaccume line over to the grommet in the firewall where the nylon line came out.
02-05-04, 09:10 AM
#3
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
I ran it from the former double throttle hold off nipple on the back of the TB, along the brake lines to the steering firewall grommet, & up the A-pillar.
(I love cool mornings)
(I love cool mornings)
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
