HEY GUYS guess what
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Morgan County, Indiana
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
HEY GUYS guess what
Well in spring if I get my ATV sold i will have my tranny Changed by a guy on the fourms , he lives about a few hours from me.Hes willing to do it for about $1,500-$1,700 depending on what i want done extra , you guys think its a good deal sence i want a maunel tranny more than my car?
#3
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Morgan County, Indiana
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
well i cant , i have no clue were to start and i can throw money at ppl , everyone here is like i :i hooked up the superquolagation to day and i saw a dyno test giving me .5th of a hp , im not a car geek , i cant work on tranny or anything ill prob get half way through and give up , ied rather do this i think its far money , sence ied half to buy a flywheel for it , anyone know what flywheel i should buy?
#6
stop stealing my avatar
Join Date: Apr 2002
Location: Canton MI
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Uh, you are getting raped. Talk to Kevin Landers, I would go with a t2 trans and an ACT street/strip clutch with a light weight 11lb. flywheel. This setup would probally be close to the $1700 price, but you would have a t2 trans, lighter flywheel, and a clutch that will be almost impossible for your NA to break.
#7
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Morgan County, Indiana
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
ok ill keep that in mind this spring , ill put it in a read me , and im not getting raped if i cant do it myself like all you itt tech grads , and im going there after high school!
Trending Topics
#12
Re: MANUAL M-A-N-U-A-L
Originally posted by pianoprodigy
Get it freakin' right.
MANUAL.
not maenul
or manneuul
but MANUAL.
Did you even graduate High School?
Get it freakin' right.
MANUAL.
not maenul
or manneuul
but MANUAL.
Did you even graduate High School?
why are u so hurt that he mis-spelled it? did mis-spelling **** u in the *** once? did mis-spelling kill your mother or something? does it really bother u that much. lighten up haha...
Working to make the world a better place...one ************ at a time:-D
#14
Displacement > Boost
Join Date: Oct 2002
Location: Mississippi
Posts: 3,503
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cbrock
Hey, I don't go to ITT tech. I'm a mechanical engineering student
Now if you'll excuse me...me and my fellow nerds will now return to the nerdury.
Hey, I don't go to ITT tech. I'm a mechanical engineering student
Now if you'll excuse me...me and my fellow nerds will now return to the nerdury.
I wish more Engineers liked the second generation RX-7. These boards would be more interesting
#15
Displacement > Boost
Join Date: Oct 2002
Location: Mississippi
Posts: 3,503
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: MANUAL M-A-N-U-A-L
Originally posted by gen2ForCe
why are u so hurt that he mis-spelled it? did mis-spelling **** u in the *** once? did mis-spelling kill your mother or something? does it really bother u that much. lighten up haha...
Working to make the world a better place...one ************ at a time:-D
why are u so hurt that he mis-spelled it? did mis-spelling **** u in the *** once? did mis-spelling kill your mother or something? does it really bother u that much. lighten up haha...
Working to make the world a better place...one ************ at a time:-D
Let me at your mis-spelling english flunking street r4Yz@r feet
#16
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Morgan County, Indiana
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Well a 2001 Polaris Trail Blazer , Mint , little dirt on frame , dust from sitting , waxes up real nice , woth $2,500 min and max is about $3000
#17
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Morgan County, Indiana
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dr0x
Didnt Kevin say 5-700$ for the tii tranny swap, then another 200$ if you wanted a tii rear end?
Didnt Kevin say 5-700$ for the tii tranny swap, then another 200$ if you wanted a tii rear end?
#19
I came, I saw, I boosted.
Join Date: Apr 2001
Location: Windsor, Ontario, Canada
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
OMG... you can find N/A trannys for 1-200 bucks!!!!!!!!
It takes about 4 hours total to swap the tranny.
-Unscrew the shifter ****
-Unbolt the front part of the exhaust.
-Unplug the speedo cable and reverse/5th gear switch from the tranny.
-Unbolt the driveshaft yoke u-bolts...
-Pull the driveshaft out
-Unplug and unbolt the starter motor
-Remove the tranny-engine bolts
-Support the tranny... then unbolt the crossmember underneath the tranny.. and slide it out.
Dat's it! (I might have missd something... who knows)
Installation is the reverse... it's just a bit of a pain to line it up.. I prefer to get right underneath the tranny, bench press it by hand and slide it up.... it's pretty light, and I'm not a weak guy ( )
I'll do it for you for $1500! I'll even drive there!!! I'll even buy you the tranny to install!!
It takes about 4 hours total to swap the tranny.
-Unscrew the shifter ****
-Unbolt the front part of the exhaust.
-Unplug the speedo cable and reverse/5th gear switch from the tranny.
-Unbolt the driveshaft yoke u-bolts...
-Pull the driveshaft out
-Unplug and unbolt the starter motor
-Remove the tranny-engine bolts
-Support the tranny... then unbolt the crossmember underneath the tranny.. and slide it out.
Dat's it! (I might have missd something... who knows)
Installation is the reverse... it's just a bit of a pain to line it up.. I prefer to get right underneath the tranny, bench press it by hand and slide it up.... it's pretty light, and I'm not a weak guy ( )
I'll do it for you for $1500! I'll even drive there!!! I'll even buy you the tranny to install!!
Last edited by Bambam7; 12-27-02 at 11:31 PM.
#20
Rotary Enthusiast
iTrader: (1)
Join Date: Aug 2001
Location: MI 48111
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
2 more semesters and I'm out. Don't expect to have to write 100 page papers. Perhaps 30 pages. Just get really good at interpolating data for thermo and remember laplace transforms (diff eq) for a vibes class. After statics and dynamics, it's pretty much the same stuff over and over again.
#22
Hks Ownz Me (
Join Date: Dec 2001
Location: corona,CA
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Bambam7
Dat's it! (I might have missd something... who knows)
Installation is the reverse... it's just a bit of a pain to line it up.. I prefer to get right underneath the tranny, bench press it by hand and slide it up.... it's pretty light, and I'm not a weak guy ( )
I'll do it for you for $1500! I'll even drive there!!! I'll even buy you the tranny to install!! [/B]
Dat's it! (I might have missd something... who knows)
Installation is the reverse... it's just a bit of a pain to line it up.. I prefer to get right underneath the tranny, bench press it by hand and slide it up.... it's pretty light, and I'm not a weak guy ( )
I'll do it for you for $1500! I'll even drive there!!! I'll even buy you the tranny to install!! [/B]
#23
Rotary Enthusiast
Join Date: May 2002
Location: Boston
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
why are u so hurt that he mis-spelled it? did mis-spelling **** u in the *** once? did mis-spelling kill your mother or something? does it really bother u that much. lighten up haha...
godamn i wanna make the world a better place too
#24
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Originally posted by importboi22
GODDAMN SON!!! you can pick that sucker up.... me and my dad picked up the t2 tranny above our heads to line it up so maybe thats why it felt so heavy....i have a lift ^_^ but no tranny jack
GODDAMN SON!!! you can pick that sucker up.... me and my dad picked up the t2 tranny above our heads to line it up so maybe thats why it felt so heavy....i have a lift ^_^ but no tranny jack
#25
Full Member
Join Date: Mar 2002
Location: San Rafael, CA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
my auto teacher and i did a bronco 2 tranny and clutch in about 2 hours , but yeah do the work your self ... the writeups are great on this fourm plus u would save (in your case) 500$ its worth it to me.
oh and gen2ForCe call me a lazy as bitoch but its really frustrating when ppl dont spell things right over and over agin ... it get brutal to read.
nate
oh and gen2ForCe call me a lazy as bitoch but its really frustrating when ppl dont spell things right over and over agin ... it get brutal to read.
nate