help:where can i buy a turbo wastegate for my turboII that alrdy hs the lrgr byps vlv
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: SO CAL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
help:where can i buy a turbo wastegate for my turboII that alrdy hs the lrgr byps vlv
i heard that prior to install of downpipe and or fullback exhaust system,i must do some mods to the wastegate on the turbo?where can i buy the wastegate with the bigger valve or what is it that i need to do to the wastegate to make it from constantly boosting and blowing my engine.?please someone help me out with some good info?
#4
#7
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by SlowCelica94
What about the flap that covers that hole? I'm guessing it's not wide enough to cover the ported hole.
You can only port the hole out to about 1mm less than the flapper..
My suggestion is to buy another turbo and send the hotside to bryan at BNR and have him put a 35mm wastegate in it....
Trending Topics
#9
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally Posted by SlowCelica94
What about the flap that covers that hole? I'm guessing it's not wide enough to cover the ported hole.
#12
Full Member
Join Date: Nov 2004
Location: bloomington, IN
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
So pretty much everyone is just welding a washer to the wastegate flap?
As far as the fuel upgrade with the FCD and other mods (intake, exh, boost @12psi), I'm planning on running 750cc secondary injectors. No turbo upgrade is planned, just a fmic and bolts ons. Will I be safe will a large fuel pump, 750cc and an AFC2 (didn't want to shell out for an rtek or microtek since I'm not upgrading the turbo)
As far as the fuel upgrade with the FCD and other mods (intake, exh, boost @12psi), I'm planning on running 750cc secondary injectors. No turbo upgrade is planned, just a fmic and bolts ons. Will I be safe will a large fuel pump, 750cc and an AFC2 (didn't want to shell out for an rtek or microtek since I'm not upgrading the turbo)
Thread
Thread Starter
Forum
Replies
Last Post