fc3sdude

I need to find out were my fuel pump fuse it thanks.

NZConvertible

Why? If we know what the whole problem is we can give you a whole solution.

The fuel pump is fed from the ENGINE fuse in the interior engine box. If it's blown the engine won't run because the EFI system won't have power either.

If you're checking for power at the fuel pump, it won't get any unless the engine is cranking or running.

More info would be good...

fc3sdude

I was wanting to know so that i could take it out and deflood my car. Like shut of the fuel pump take the spark plugs out and crank the motor but its cool i found it.

NZConvertible

Pulling the EGI fuse in the engine bay is easier. Even better is installing a fuel pump switch.

This pic shows the Circuit Opening Relay that turns off the fuel pump if the engine stalls. It’s a located under the dash next to the steering column and has a yellow base.

The B wire (black with a white stripe) is the power supply and the Fp wire (blue with a red stripe) goes to the fuel pump. The switch can go into either of these wires, it doesn’t matter which. Simply cut the wire, extend each cut end to your chosen switch location using the same or thicker gauge wire and terminate them onto the switch. Note that the STA wire is also black with a white stripe, but it’s thinner. Make sure you get the right wire.

See? More info = better answer!