help:S.....depost if im getting annoying lol(
#1
Junior Member
Thread Starter
Join Date: Feb 2008
Location: vic city, british columbia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
help:S.....depost if im getting annoying lol(
okay, plan was to take the 86 n/a body i have and put and engine in it, now im being told that would be very pricey and time consuming, maybe if i was a rotary expert wit lots of money i wouldnt care, but im not, so....i need some advice, i found an 88 tII, the engine is imported, body is mint, only problem is, when it was dropped in it wouldnt start................basically i need to know if i should jus scrap the body and find another one if im so interested in rx7s, or acually try to do something with it,
#2
Senior Member
iTrader: (1)
Join Date: May 2006
Location: southern indiana
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
well a 88 tii is a good start for a rx7 it has a beefy trany and lsd... youll probly be better of tryn to fix it, do a compression check and that will give u a better idea of where your sitn... if your talkn about a n/a to tii swap that is much more costly and time consuming..... maybe you can part out your n/a and use the money to fix the tii..
#3
Junior Member
Thread Starter
Join Date: Feb 2008
Location: vic city, british columbia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
basically a n/a to TII is what i want, if its more sensable to buy a TII, complete in running condidtion i think im going to have to go down that road, it is a possibility to part out the n/a, if any one needs anything i can check if its worth taking, it has a new clutch for sure thats never been put it, id feel kinf of bad buying a new rx in running condition becasue my goal was to put an engine in this one so its not jus a lawn ornament
Thread
Thread Starter
Forum
Replies
Last Post
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM