2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Help!!!!!! R My Corner Seals Bad ??

Thread Tools
 
Search this Thread
 
Old Nov 5, 2006 | 08:46 PM
  #1  
chiorx7's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Nov 2005
Posts: 92
Likes: 0
From: miami fl
Cool Help!!!!!! R My Corner Seals Bad ??

GUYS I HAVE A TURBO 2 AND THE COMPRESSION IS FINE OVER 95 EACH ROTOR BUT MY CAR IS RUNNIG BAD LIKE THE INJECTORS WERE BAD OR SOMETHING BUT NO THE INJECTORS R GOOD >>> OK NOW THE CAR STILL RUNNING FAST AS HELL BUT IT SOUND BAD AND DRIVES ROUGH I LOOK AT THE EXHAUST AND SOMETIMES SMOKE LIKE A LIL BIT >>>> AND ANOTHER THING IS WHEN YOU OPEN THE OIL CAP YOU HEAR A SQUEAK NOISE INSIDE COULD IT BE MY SIDES SEAL SPRINGS OR WHAT ??

INJECTORS R GOOD
SPARK PLUGS R GOOD
COILS AND WIRES R GOOD
Reply
Old Nov 5, 2006 | 08:58 PM
  #2  
Stanello's Avatar
backslash beanbagrace
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Oct 2004
Posts: 2,141
Likes: 2
From: San Francisco, CA
You're gonna have to be more specific than "RUNNIG BAD"

Does it idle fine, hesitate or buck while driving, etc?
Reply
Old Nov 5, 2006 | 09:09 PM
  #3  
chiorx7's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Nov 2005
Posts: 92
Likes: 0
From: miami fl
Well The Car Idles Perfect When U Rev Up Or Drive It Sounds Like A 4 Cyl Angine Running On 3 More Specifications??
Reply
Old Nov 5, 2006 | 09:58 PM
  #4  
chiorx7's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Nov 2005
Posts: 92
Likes: 0
From: miami fl
damn!!!! ok every rpm going normal speed and going fast same actions on throttle
Reply
Old Nov 5, 2006 | 10:03 PM
  #5  
SirCygnus's Avatar
whats going on?
Tenured Member 20 Years
iTrader: (1)
 
Joined: Mar 2004
Posts: 4,930
Likes: 8
From: atlanta ga
huh? i dont know what the problem. no one knows. my guess its a vacume leak. as with anything on an rx7.
Reply
Old Nov 6, 2006 | 08:56 AM
  #6  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
First of all, PLEASE stop typing in all caps. It's annoying, and considered rude and shouting.

Also, stop bumping your post.

It also helps if you clearly communicate your problems and ideas so that we have some notion of what you are talking about.

Now, corner seals rarely go bad. They really only have issues if the engine has sat for a while (they get stuck) or has a botched port job (they get ground down by the port edge).

Side seals are the same way. They won't fail unless they are installed improperly or for the same reasons above.

We need a little more information about your problem. What does "running bad" mean?

Have you checked for vacuum leaks? Any black smoke? How does it idle? What is your mileage? Did this just suddenly start or did someone screw around with the car?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM




All times are GMT -5. The time now is 01:12 PM.