hi , i wanna know how to change injector clip from an s4 to an s5. i have 4 550cc injectors (s5 high inpendance),freshly rebuild by rc eng. right now, i have four 550cc injectors(s4 high inpendance) in my motor . what i want is to put s5 clip in my s4 harness. the gauge off the wire is not the same (s4 wire is bigger) so i can't just splice wires together.

i know this is hard to read but, any help will be greatly apreciate.
thank you.

 

You mean change the injector connector.

Yes, it won't be a problem. Just cut the connector off the old harness and solder onto the new harness. Make sure to insulate the connection properly with heat shrink tubing. If the connector is in poor condition, you can purchase a replacement from most auto parts stores.

 

thank you Aron,
i wanna do that but the wire gage is not the same, when i have stripped those wires(s4 and s5 wire) i have seen a gage difference. that's why i am not sure about doing that.
i will do it for sure if that could work without problem.