2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Help with no-spark problem

Thread Tools
 
Search this Thread
 
Old Sep 18, 2003 | 01:00 PM
  #1  
CrackHeadMel's Avatar
Thread Starter
Learned alot | Alot to go
Tenured Member 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
Help with no-spark problem

Me and a friend have prob's on a n/a -> turbo swap. We swaped over everything and we seem to not get a spark at the coils

the coils have power
the ecu has power



one thing i noticed is the fuel pump doesnt come on at all either, or atleast it doesnt sound like it does, any idea's suggestions etc?

-Jacob
Reply
Old Sep 18, 2003 | 02:52 PM
  #2  
VroomVroomVroom's Avatar
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 90
Likes: 0
From: Forest, Ontario, Canada
Is your main engine harness ground connected? (under the UIM rear bolt).
Is the AFM plugged in?
If both of these are good, I suggest you try jumpering the fuel pump test connector and checking fuel pressure / flow,
Dave
Reply
Old Sep 18, 2003 | 04:04 PM
  #3  
CrackHeadMel's Avatar
Thread Starter
Learned alot | Alot to go
Tenured Member 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
AFM is pluged in, im not 100% on the main harness ground but ill check, we have been having grounding problems the entire time
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 01:16 PM.