Help No Spark after 5 speed swap
#1
Help No Spark after 5 speed swap
Im almost done with the swap the only thing that i have left to do it get it started, but i seem to have no spark, i checked all of the grounds they seem fine, the battery is good and the CAS is plugged in what could be the problem
Thanks
Dan
Thanks
Dan
#2
Senior Member
Join Date: Apr 2003
Location: New Idaho
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
You probably blew the 15A eng fuse. Check that first.
the fuse cover is right under the steering wheel by the clutch pedal. I've blown this fuse connecting the wrong wires when i did the 5 speed swap. And I've blown it changing out the starter too.
the fuse cover is right under the steering wheel by the clutch pedal. I've blown this fuse connecting the wrong wires when i did the 5 speed swap. And I've blown it changing out the starter too.
#4
Old School Rotors
Join Date: Jul 2003
Location: South Florida
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Good for you man. if you haven't driven a 5 speed RX-7 before, you are about to find out that a manual RX-7 can do as much with only 3000 rpm, as an auto can do with its entire powerband!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM