help needed
#1
Full Member
Thread Starter
Join Date: Dec 2003
Location: Toronto
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
help needed
I just installed a new motor in my rx7 (cuz sadly my old one blew a week ago)
1st try it started everything seems to be good but she is not holding idle at all
all emissions have been removed I caped everything properly, is there something that need to be adjusted on top ( I have not tuned it properly yet)
and another thing if someone can do me a reference, there is 4 solenoids on the vaccum nest that is right besides the oil filler neck, when I took my harness off of them I dont know the color order to put the in again. Please if someone can look on their own cars and let me know ( there is 4 solenoids and 5 connectors)
thanks in advance
1st try it started everything seems to be good but she is not holding idle at all
all emissions have been removed I caped everything properly, is there something that need to be adjusted on top ( I have not tuned it properly yet)
and another thing if someone can do me a reference, there is 4 solenoids on the vaccum nest that is right besides the oil filler neck, when I took my harness off of them I dont know the color order to put the in again. Please if someone can look on their own cars and let me know ( there is 4 solenoids and 5 connectors)
thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM