HELP mystery connectors and such
#1
Full Member
Thread Starter
Join Date: Oct 2006
Location: mn
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
HELP mystery connectors and such
where do these 2 connectors go?
and what plugs into this
and where does this hose come FROM AND GO
my mom keeps yellin about the car not being fixed
so im in a bit of a hurry to get things workin
thanks a ton
and what plugs into this
and where does this hose come FROM AND GO
my mom keeps yellin about the car not being fixed
so im in a bit of a hurry to get things workin
thanks a ton
#3
Junior Member
Join Date: Jan 2007
Location: Port Orchard, WA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
1 the connector on the right goes to the AWS it sits on top of the upper intake manifold on turbo cars and the left one goes to a cylinder shaped thing(the name escapes me atm) thats located on the back of the upper intake manifold
2 thats one of the water temp sensors it should have a single black(might wanna double check the color) wire going to it looks like it feel outta the connector
3 I think that vac line goes to the back of the turbo inlet duct it should fit into the bigger hole that sticks out a bit
2 thats one of the water temp sensors it should have a single black(might wanna double check the color) wire going to it looks like it feel outta the connector
3 I think that vac line goes to the back of the turbo inlet duct it should fit into the bigger hole that sticks out a bit
#4
Full Member
Thread Starter
Join Date: Oct 2006
Location: mn
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
thanks a ton.
alright your right about the hose
it goes into the turbo inlet duct, but then i traced it and it goes to a hardline
and then the hardline is suppose to go to the rats nest.
but i removed the rats nest so now where is that hose suppose to be hooked up to?
TID <-- the hose in pic #3 <-- ????
alright your right about the hose
it goes into the turbo inlet duct, but then i traced it and it goes to a hardline
and then the hardline is suppose to go to the rats nest.
but i removed the rats nest so now where is that hose suppose to be hooked up to?
TID <-- the hose in pic #3 <-- ????
#5
(blank)
iTrader: (1)
Check wiring colors and compare to the wiring diagrams in the FSM (in my sig., and another link below).
The one near the water neck (check the color) may go right below it in the picture to the fan switch mounted on the *top* of the water neck.
http://mazdarx7.iougs.com/fsm.shtml
The one near the water neck (check the color) may go right below it in the picture to the fan switch mounted on the *top* of the water neck.
http://mazdarx7.iougs.com/fsm.shtml
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM