Help me finish my jspec TII Swap!!
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Spearfish, SD
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Help me finish my jspec TII Swap!!
Hey I am almost finished my na to jspec turbo swap and I used an ecu and wiring harness from an 88 a spec TII and the engine was from an 88 jspec auto. I used the na flywheel and everything bolted in great, but now im having trouble attatching hoses and wiring. Ive got most components in like the boost sensor and knock control. But the alternator doesnt have the same connector and I cant figure out which connector on the new harness to use. There are quite a few unused connectors. Also there is no connector for the tps. My car was carberated before the swap so I also need help figuring out where the brake booster goes and a couple of other hoses. Ill try to get pictures later. I am away from a computer now untill monday. I really need to get this car running.
Sorry for the long post. What i really need to know now is how to hook up the tps and alternator.
Sorry for the long post. What i really need to know now is how to hook up the tps and alternator.
Thread
Thread Starter
Forum
Replies
Last Post
Wicked93gs
Other Engine Conversions - non V-8
44
01-12-22 10:08 AM